DHAG systems replaces conventional, expensive fuel like LPG, LDO, FO, NG firing in baking, polymerizing, curing, drying, etc processes.
These systems can give hot air to the process upto 700°C and 1crore Kcal/hr .
The temperature accuracy of fully automated DHAG system is ±2°C.
These systems can be operated on any of the low cost solid fuel available locally where some amount of dust/ash particles are allowed for process requirement.
Solid fuel fired FBC system consist a nozzle tube sheet with attached air plenum & a side structure frame. Graded CI (Cast Iron) nozzles are fitted on top of the nozzle plate.
Nozzle plate provided with sand drain pockets to remove heavy unwanted silica particle & clinkers from furnace.
Motor driven screw conveyer will feel the fuel continuously into the furnace through designed fuel feeding venturi system aided by the S.F.D. Fan air.
All the standard / special shaped refractory bricks for furnace walls along with fixtures & holders would be provided.
The system offered is extremely user friendly. Alarms & safety interlocks have been provided to ensure different parameters of HAG.
In case of high hot air temperature audio/visual alarms are activated on panel.
Visual alarms are activated in case of fault in V/F controllers.
PID temperature controllers & pressure transmitters are provided for different required system parameters.
The panel is PLC based having sophisticated but user friendly controls enabling the operator to run the HAG in automatic or manual made as desired.
Main MCCB, V/F drives, annunciation module with alarms, PID controllers, indicating lamps.
|
Our Products |